一、性能參數
風量范圍:2655~83650m3/h
風壓范圍:520~2360 Pa
傳動方向:皮帶式(C)
方向角度:可制成順時針或逆時針,均可制成0°,45°,90°,135°,180°,225°,270°,315°八種角度。
二、用途
此風機分為后傾式及S型風葉,葉片寬大,流線型對于涂裝設備烤漆爐,工業烤箱,工業烤爐,熱風循環場所顯著
定載風壓特性,中壓型,風葉設計不易造成堵塞,噪音低,廣泛用于涂裝設備行業,高溫爐行業,陶瓷窯爐行業等輸送熱氣
特別說明:
保溫層:常規100mm;根據客戶使用溫度及型號調整(50mm-300mm)厚度;采用硅酸鋁棉保溫
進風口可制作成:方形及圓形
軸承座:連體式,分體式
Performance parameters
Air volume range: 2655 ~ 83650m3/h
Wind pressure range: 520-2360 Pa
Driving direction: belt type (C)
Direction angle: it can be made clockwise or anticlockwise, and can be made into eight angles: 0 °, 45 °, 90 °, 135 °, 180 °, 225 °, 270 °, 315 °.
Purpose
This fan is divided into backward inclined and S-shaped blades, which are wide and streamlined. It is significant for paint baking ovens, industrial ovens, industrial ovens and hot air circulation places of painting equipment
Constant load wind pressure characteristics, medium pressure type, fan blade design is not easy to cause blockage, low noise, widely used in coating equipment industry, high-temperature furnace industry, ceramic kiln industry, etc. to transport hot gas
Special instructions:
1.Thermal insulation layer: 100mm in general; Adjust the thickness (50mm-300mm) according to the customer's operating temperature and model; Aluminum silicate wool insulation
2.The air inlet can be made into square and round
3.Bearing pedestal: integral type, split type