產品特點

Product  Feature

◆ 的性能

Product Overview

★ ADD系列軸流風機具有可靠的性能和耐久力，適用于民用、公共建筑、廠房等建筑的送排風，同時該系列風機經國家部門認可可以用于消防排煙。

   Model AS axial flow fans are important part of products. They have excellent Performance and workmanship,

are suitable for commercial building supply and exhaust application. These Fans are approved for smoke removal

duty by China authorities.

★工作范圍：風量可達120000m3/h，靜壓高達850Pa；

Volume up to:120000 M3/H, Static Pressure: up to 850Pa.

★平衡等級：平衡等級高達G2.5（ISO-1940）

Balancing Level as high as G2.5 (ISO.1940).

◆ 用途:

USAGE:

★用于高層建筑的送排風

For building general supply/exhaust ventilation

★可用于消防排煙或正壓送風

For emergency smoke removal or positive pressure supply duty application

★車庫、地鐵及隧道的排煙

  Underground parking , subway and tunnel smoke removal

★可用于廚房的排油煙

  For kitchen grease exhaust application

★配置泛水帽及防雨罩作為屋頂風機或屋頂排煙風機

  For roof supply and (smoke) exhaust application when equipped with roof curb cap and weather hood.

◆ ADD的認證

Complied certificates and regulations

★ADD風機經國家固定滅火系統和耐火構件質量監督檢測中心，按《一般用途軸流通風機技術條件》檢驗，常規性能符合要求：按照《消防排煙風機耐高溫試驗方法》檢驗，在主風道溫度達280攝氏度時連續運行30分鐘以上，符合耐高溫性能要求，檢驗合格。

ADD fans are tested by “China National Fixed Fire Fighting System and fire Resistant Components Quality Inspection and Testing Center."The fan typical performance is approved complying with the “General Usage Axial Fan Technical Specification"(China Nation Standard GB/T 13274-91).The fans are also tested According to China Standard GA211-1999"Fire Fighting Smoke Removal Fan

High Temperature Testing Method, run continuously over 30 minutes when the Main duct air temperature is 280℃. The fans are certified to resist high temperatures.

★ADD風機符合國際GB50067-97《汽車庫，修車庫，停車庫設計防火規范》的要求，可用于上述場合的排煙和通風使用作為兩用風機。

ADD fans comply with China Nation Standard GB50067-97(“Codes of Fire Fighting Design of Garage/Car repairing facilities/parking warehouse")

◆ 產品特色

Product  Feature

★ADD葉片采用流暢模擬技術優化，保證運轉時局部受力均衡，高效節能，運行平穩，噪聲低，耐高溫性能的特點。

The blade of ADD fans are optinized by CAD Hydro -field simulating technology during the design process. The Partial stress is evenly located and spread .The blade design is high efficiency and energy saving .It runs smoothly ring operation and low noise . The fan is reliable and stable when running at high temperature.

★ADD葉片加工采用優質的模具進行機械加工，保證了葉片弧度一致，質量可靠，長期運轉建立了優質的基礎。

  The ADD blade fabrication is taking advantage of good quality and high efficiency mechanical molds .this ensures Surface curves is stable for each single blade .the size are all identical ,ａnd the mass distribution is even. This feature setup a good foundation for long time stable running .

★ADD風機結構采用一體式法蘭加工，設計強度高，風機可以落地安裝和水平吊裝，垂直吊裝等。配上泛水帽和防雨罩時可以作為屋頂風機使用。

  The ADD fan motor is located in a special chamber ,ａnd isolated from air stream .The pressure in the motor chamber is negative when the fan is running , ａnd sucks in outside clean/cool air positively through a special tube exhausted. Out of the fan after cooling the motor .This design ensures proper cooling at high temperature .

★ADD葉片具有多種規格，配合各種電機轉速或雙速電機，十分靈活。

Leaf blade with a variety of specifications, with the speed of the motor or double speed motor, very flexible.

◆命名規范

Naming Convention

例：ADD-1000 D6-0.75

▲ ADD: 軸流式風機  

   ADD axial (smoke removal)fan

▲ 1000: 風機葉輪名義直徑1000毫米

   The nominal propeller diameter is 1000mm

▲ D6: 六極電機，風機轉速960RPM

   Motor poles and RPM

▲ 0.75:電機功率0.75Kw

   Motor power 0.75Kw