The EKX 513 / 515 high rack stackers stand for high performance in the narrow aisle warehouse. They set new standards with regards to flexibility, low cost operation and ergonomics.

Flexibility through modular construction: this model has over 5 million possible configurations providing flexibility from the start.

The advantage is adaptability to any warehousing and logistics operation. An inligent truck management with our in house

electronic controller, and CAN-Bus system keeps the options open for a wide range of requirements with a large number of additional

safety features.

Excellent performance and energy efficiency: the important factors for fast throughput and outstanding cost efficiency. This is precisely

what is provided by Jungheinrich’s 3-phase AC technology with higher performance and low energy usage. The advantage:

full utilisation over two shifts in normal operation without battery change.

This high efficiency is available to the EKX operator with effortless ease. The cab provides a generous workplace with excellent

visibility. At the centre of the operators cab is the electronically adjustable operators cab:

Informative colour display. Important operating data is easily and legibly laid out.

All parameters and programmes can be set individually.

Softkeys to control functions and menus.

Travel and hydraulics control via thumb operation.

Two-handed operation for high safety and operating comfort. Sensors register the operator’s touch and pass this information

on to the onboard computer.

Pioneer of 3-phase AC technology

Over 150,000 Jungheinrich 3-phase AC trucks are in use all over the world. This depth of knowledge is reflected in today’s drive and control technology:

Excellent productivity.

Low energy consumption.

Reduced maintenance and wear.

Battery cover High productivity

AC motors with high torque.

Excellent acceleration and fast cab and supplementary lift speeds.

Simultaneous lifting / lowering of main and supplementary lift.

Quiet swivelling reach system with high travel speed.

Travel direction and height dependent diagonal travel speed profiles.

Fast working cycles with synchronised swivel （optional）.

Performance module （optional） for highest flexibility

“Lifting" module: Lift speed 0.52 m/sec and optimisation of

swivel reach movement with load recognition （EKX 515）.

“Swivel reach" module: Maximum dynamics during stacking in with

load recognition （EKX 513）.

“Floor quality recognition" module: Optimisation of travel speed （to 12 km/h） on warehouse floor conditions （in connection

with RFID floor control）.

“Capacity" module: Increased residual capacities with active

stabilisers.

Battery cover Energy management module

Doubled energy reclamation through regenerative braking and lowering.

Longer operating times with one battery charge （up to 2 shifts）.

Shorter charging times.

Active energy / battery management.

Longer battery life.

Battery rollers for quick battery change.

RFID floor quality recognition control （optional）

Truck control with transponder technology.

Permanent route measuring for exact recognition of all warehouse areas.

High flexibility regarding switching and safety functions （aisle end stop, lift / travel switch- off, speed reduction）.

Optimisation of travel speed relative to the profile of the floor.

Operating Console Integrated Jungheinrich personnel protection system （PPS）

Optionally available, factory fitted and integrated into the trucks electronic controller / CAN-Bus.

Projecting, commissioning and maintenance carried out by Jungheinrich.

Entrance Ergonomics and comfort

Generously dimensioned entrance into the cab.

Large foot well, adjustable knee supports.

Excellent visibility towards the load with low swivelling sideshift and clear view masts.

Sprung, adjustable and foldable comfort seat.

Electrically adjustable operating console with colour display.

Soft key pad （softkey） with number block.

Individual travel programmes.

Switchless two-handed operating concept.

Stop position/transfer cushioning of all hydraulic functions.

Control and CAN-Bus system

All functions are adjustable.

Electronically controlled drive wheel brake and non-wearing electromagnetic laminated brake on load wheels.

Electrically active stabilisers for maximum capacities to high lift heights （optional）.

Commissioning and maintenance

Fast and safe commissioning through teachin process.

Integrated diagnostic system for remote maintenance via modem.

1000 operating hours service interval.

Electronics with non-wearing sensor system.

The gear oil in maintenance-free and sealed for life.

Revolution counter on wheels with traction control and wear recognition on drive wheel.

Reliable operation – high availability

Robust and non-wearing 3-phase AC drives without wearing parts.

70% fewer cables and plugs due to CAN-Bus.

Extremely torsion-resistant mast for high residual capacities and low mast sway.

Additional equipment

Mechanical rail guidance.

Inductive guidance for precise control in the aisle with no mechanical loading of components.

Modular escopic forks in various designs.

Comfort package “workplace" with workplace lighting, mirror, ventilator.

Radio with CD player and MP3 interface.

Synchronised swivelling of forks.

Mechanical and electric interfaces for material flow management systems.

Jungheinrich ISM: information system for stacker management.

Truck prepared for accepting working platforms.

Modular system for lift and travel stop as well as speed reduction.

Switches on overhead load guard.Pioneer of 3-phase AC technology

Over 150,000 Jungheinrich 3-phase AC trucks are in use all over the world. This depth of knowledge is reflected in today’s drive and control technology:

Excellent productivity.

Low energy consumption.

Reduced maintenance and wear.

Battery cover High productivity

AC motors with high torque.

Excellent acceleration and fast cab and supplementary lift speeds.

Simultaneous lifting / lowering of main and supplementary lift.

Quiet swivelling reach system with high travel speed.

Travel direction and height dependent diagonal travel speed profiles.

Fast working cycles with synchronised swivel （optional）.

Performance module （optional） for highest flexibility

“Lifting" module: Lift speed 0.52 m/sec and optimisation of

swivel reach movement with load recognition （EKX 515）.

“Swivel reach" module: Maximum dynamics during stacking in with

load recognition （EKX 513）.

“Floor quality recognition" module: Optimisation of travel speed （to 12 km/h） on warehouse floor conditions （in connection

with RFID floor control）.

“Capacity" module: Increased residual capacities with active

stabilisers.

Battery cover Energy management module

Doubled energy reclamation through regenerative braking and lowering.

Longer operating times with one battery charge （up to 2 shifts）.

Shorter charging times.

Active energy / battery management.

Longer battery life.

Battery rollers for quick battery change.

RFID floor quality recognition control （optional）

Truck control with transponder technology.

Permanent route measuring for exact recognition of all warehouse areas.

High flexibility regarding switching and safety functions （aisle end stop, lift / travel switch- off, speed reduction）.

Optimisation of travel speed relative to the profile of the floor.

Operating Console Integrated Jungheinrich personnel protection system （PPS）

Optionally available, factory fitted and integrated into the trucks electronic controller / CAN-Bus.

Projecting, commissioning and maintenance carried out by Jungheinrich.

Entrance Ergonomics and comfort

Generously dimensioned entrance into the cab.

Large foot well, adjustable knee supports.

Excellent visibility towards the load with low swivelling sideshift and clear view masts.

Sprung, adjustable and foldable comfort seat.

Electrically adjustable operating console with colour display.

Soft key pad （softkey） with number block.

Individual travel programmes.

Switchless two-handed operating concept.

Stop position/transfer cushioning of all hydraulic functions.

Control and CAN-Bus system

All functions are adjustable.

Electronically controlled drive wheel brake and non-wearing electromagnetic laminated brake on load wheels.

Electrically active stabilisers for maximum capacities to high lift heights （optional）.

Commissioning and maintenance

Fast and safe commissioning through teachin process.

Integrated diagnostic system for remote maintenance via modem.

1000 operating hours service interval.

Electronics with non-wearing sensor system.

The gear oil in maintenance-free and sealed for life.

Revolution counter on wheels with traction control and wear recognition on drive wheel.

Reliable operation – high availability

Robust and non-wearing 3-phase AC drives without wearing parts.

70% fewer cables and plugs due to CAN-Bus.

Extremely torsion-resistant mast for high residual capacities and low mast sway.

Additional equipment

Mechanical rail guidance.

Inductive guidance for precise control in the aisle with no mechanical loading of components.

Modular escopic forks in various designs.

Comfort package “workplace" with workplace lighting, mirror, ventilator.

Radio with CD player and MP3 interface.

Synchronised swivelling of forks.

Mechanical and electric interfaces for material flow management systems.

Jungheinrich ISM: information system for stacker management.

Truck prepared for accepting working platforms.

Modular system for lift and travel stop as well as speed reduction.

Switches on overhead load guard.