- 產品概述
MRG-3202(5L)
稀油油脂一體潤滑油泵PLC型 Self-control Grease and Thin Oil Lubrication Pump with PLC Type
技術參數Technical Parameters
型號 Model | 電壓頻率 Voltage | 額定轉速 Rated ritary Speed | 功率 Power | 電流 Current(A) | 額定壓力 Rated pressure kgf/cm2 | 更大壓力 Max pressure kgf/cm2 | 容積 Volume | 吐出量 Discharge capacity ml/min | 使用油粘度 Rated pressure kgf/cm2 | 備注 Remarks |
MRG-3202-500T | 220V 50/60HZ | 1350 | 25W | 0.22 | 20 | 35 | 5L | 200-300 CC/min | 30#稀油~00#油脂 | MRG-3201代表 電壓110V MRG-3202代表 電壓220V |
MRG-3202-500X | 220V 50/60HZ | |||||||||
MRG-3202-510X | 220V 50/60HZ |
*型號帶T為抵抗式，帶X為容積式，不帶" A"為異步電機
*Mode name with " T" is resistant, mode name with “X” is volumetric,without A is asynchronous motor
性能與特點Performance Characteristics
1 .供油和間歇時間同主機電腦控制設定
2 .油箱容量油2、3、4升等，吐出量200- 300CC/min，油箱有目視油位計和自動控油裝置，當油量不足時，紅燈亮，提醒加油。
3 .油泵里面內設兩個閥（一個調壓閥，一個缷壓閥）
4 .可根據客戶需求定制專屬金屬油箱。
（可根據客戶需要定做專屬潤滑方案）
1.Oil supply and intermittent time are adjustable by PC controller.
2.With the out of oil 200~300CC/min, the oil tank capacity has 2, 3 and 4 litre, etc.
There are oil level gauge and automatic oil control device on the oil tank.
The red light is on when the oil quantity is insufficient, which reminds you to fill it up.
3.There are two valves in the oil pump, pressure regulating valve and unloading valve. (refer to figure 1-3)
4.Metal oil tank can be customized.
(specific lubrication plan can be customized)
面板圖 The control panel
接線圖The wiring diagram
- 產品應用
